|
|
|||
| Error Codes |
|
600
|
An operation is pending. |
|
601
|
The port handle is invalid. |
|
602
|
The port is already open. |
|
603
|
Caller's buffer is too small. |
|
604
|
Wrong information specified. |
|
605
|
Cannot set port information. |
|
606
|
The port is not connected. |
|
607
|
The event is invalid. |
|
608
|
The device does not exist. |
|
609
|
The device type does not exist. |
|
610
|
The buffer is invalid. |
|
611
|
The route is not available. |
|
612
|
The route is not allocated. |
|
613
|
Invalid compression specified |
|
614
|
Out of buffers. |
|
615
|
The port was not found. |
|
616
|
An asynchronous request is pending. |
|
617
|
The port or device is already disconnecting. |
|
618
|
The port is not open |
|
619
|
The port is disconnected. |
|
620
|
There are no endpoints |
|
621
|
Cannot open the phone book file. |
|
622
|
Cannot load the phone book file. |
|
623
|
Cannot find the phone book entry. |
|
624
|
Cannot write the phone book file. |
|
625
|
Invalid information found in the phone book. |
|
626
|
Cannot load a string. |
|
627
|
Cannot find key. |
|
628
|
The port was disconnected. |
|
629
|
The port was disconnected by the remote machine. |
|
630
|
The port was disconnected due to hardware failure. |
|
631
|
The port was disconnected by the user. |
|
632
|
The structure size is incorrect. |
|
633
|
The port is already in use or is not configured for Remote Access dialout. |
|
634
|
Cannot register your computer on the remote network. |
|
635
|
Unknown error. |
|
636
|
The wrong device is attached to the port. |
|
637
|
The string could not be converted. |
|
638
|
The request has timed out. |
|
639
|
No asynchronous net available. |
|
640
|
A NetBIOS error has occurred. |
|
641
|
The server cannot allocate NetBIOS resources needed to support the client. |
|
642
|
One of your NetBIOS names is already registered on the remote network. |
|
643
|
A network adapter at the server failed. |
|
644
|
You will not receive network message popups. |
|
645
|
Internal authentication error. |
|
646
|
The account is not permitted to log on at this time of day. |
|
647
|
The account is disabled. |
|
648
|
The password has expired. |
|
649
|
The account does not have Remote Access permission. |
|
650
|
The Remote Access server is not responding. |
|
651
|
Your modem (or other connecting device) has reported an error. |
|
652
|
Unrecognized response from the device. |
|
653
|
A macro required by the device was not found in the device .INF file section. |
|
654
|
A command or response in the device .INF file section refers to an undefined macro |
|
655
|
The macro was not found in the device .INF file section. |
|
656
|
The macro in the device .INF file section contains an undefined macro |
|
657
|
The device .INF file could not be opened. |
|
658
|
The device name in the device .INF or media .INI file is too long. |
|
659
|
The media .INI file refers to an unknown device name. |
|
660
|
The device .INF file contains no responses for the command. |
|
661
|
The device .INF file is missing a command. |
|
662
|
Attempted to set a macro not listed in device .INF file section. |
|
663
|
The media .INI file refers to an unknown device type. |
|
664
|
Cannot allocate memory. |
|
665
|
The port is not configured for Remote Access. |
|
666
|
Your modem (or other connecting device) is not functioning. |
|
667
|
Cannot read the media .INI file. |
|
668
|
The connection dropped. |
|
669
|
The usage parameter in the media .INI file is invalid. |
|
670
|
Cannot read the section name from the media .INI file. |
|
671
|
Cannot read the device type from the media .INI file. |
|
672
|
Cannot read the device name from the media .INI file. |
|
673
|
Cannot read the usage from the media .INI file. |
|
674
|
Cannot read the maximum connection BPS rate from the media .INI file. |
|
675
|
Cannot read the maximum carrier BPS rate from the media .INI file. |
|
676
|
The line is busy. |
|
677
|
A person answered instead of a modem. |
|
678
|
There is no answer. |
|
679
|
Cannot detect carrier. |
|
680
|
There is no dial tone. |
|
681
|
General error reported by device. |
|
682
|
ERROR WRITING SECTIONNAME |
|
683
|
ERROR WRITING DEVICETYPE |
|
684
|
ERROR WRITING DEVICENAME |
|
685
|
ERROR WRITING MAXCONNECTBPS |
|
686
|
ERROR WRITING MAXCARRIERBPS |
|
687
|
ERROR WRITING USAGE |
|
688
|
ERROR WRITING DEFAULTOFF 689 ERROR READING DEFAULTOFF |
|
690
|
ERROR EMPTY INI FILE |
|
691
|
Access denied because username and/or password is invalid on the domain. |
|
692
|
Hardware failure in port or attached device. |
|
693
|
ERROR NOT BINARY MACRO |
|
694
|
ERROR DCB NOT FOUND |
|
695
|
ERROR STATE MACHINES NOT STARTED |
|
696
|
ERROR STATE MACHINES ALREADY STARTED |
|
697
|
ERROR PARTIAL RESPONSE LOOPING |
|
698
|
A response keyname in the device .INF file is not in the expected format. |
|
699
|
The device response caused buffer overflow |
|
700
|
The expanded command in the device .INF file is too long. |
|
701
|
The device moved to a BPS rate not supported by the COM driver. |
|
702
|
Device response received when none expected. |
|
703
|
ERROR INTERACTIVE MODE |
|
704
|
ERROR BAD CALLBACK NUMBER |
|
705
|
ERROR INVALID AUTH STATE |
|
706
|
ERROR WRITING INITBPS |
|
707
|
X.25 diagnostic indication. |
|
708
|
The account has expired. |
|
709
|
Error changing password on domain. |
|
710
|
Serial overrun errors were detected while communicating with your modem. |
|
711
|
RasMan initialization failure. Check the event log. |
|
712
|
Biplex port is initializing. Wait a few seconds and redial. |
|
713
|
No active ISDN lines are available. |
|
714
|
Not enough ISDN channels are available to make the call. |
|
715
|
Too many errors occurred because of poor phone line quality. |
|
716
|
The Remote Access IP configuration is unusable. |
|
717
|
No IP addresses are available in the static pool of Remote Access IP addresses. |
|
718
|
PPP timeout. |
|
719
|
PPP terminated by remote machine. |
|
720
|
No PPP control protocols configured. |
|
721
|
Remote PPP peer is not responding. |
|
722
|
The PPP packet is invalid. |
|
723
|
The phone number, including prefix and suffix, is too long. |
|
724
|
The IPX protocol cannot dial-out on the port because the computer is an IPX router. |
|
725
|
The IPX protocol cannot dial-in on the port because the IPX router is not installed.. |
|
726
|
The IPX protocol cannot be used for dial-out on more than one port at a time. |
|
727
|
Cannot access TCPCFG.DLL. |
|
728
|
Cannot find an IP adapter bound to Remote Access. |
|
729
|
SLIP cannot be used unless the IP protocol is installed. |
|
730
|
Computer registration is not complete. |
|
731
|
The protocol is not configured. |
|
732
|
The PPP negotiation is not converging. |
|
733
|
The PPP control protocol for this network protocol is not available on the server. |
|
734
|
The PPP link control protocol terminated.. |
|
735
|
The requested address was rejected by the server.. |
|
736
|
The remote computer terminated the control protocol. |
|
737
|
Loopback detected.. |
|
738
|
The server did not assign an address. |
|
739
|
The remote server cannot use the Windows NT encrypted password. |
|
740
|
The TAPI devices configured for Remote Access failed to initialize or were not installed correctly. |
|
741
|
The local computer does not support encryption. |
|
742
|
The remote server does not support encryption. |
|
743
|
The remote server requires encryption. |
|
744
|
Cannot use the IPX net number assigned by the remote server. Check the event log. |
|
752
|
A syntax error was encountered while processing a script. |
|
777
|
The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order. |
|
797
|
The modem could not be found. This is normally down to the incorrect driver being installed. This only happens in Windows 2000™ and XP™ |